Toshiba VF-AS1 instruction manual 4enabled Enabled, Wire RS485 communication input

K-13

!

[14] Functions for lift [1/2]						Sensorless vector/vector with sensor (￿:Effective, -:Ineffective)
	Communi			Minimum			Vector control
Title	cation	Function	Adjustment range	setting unit	Default	Write during	Speed	Torque	PM	V/f	Reference
	No.			(Panel/Communi	setting	running	control	control	control
				cation)
￿￿￿￿￿	0324	Drooping output filter	0.1~200.0 rad/s (Enabled if ￿￿=3, 4, 7 or 8)	0.1/0.1	100.0	Enabled	￿/￿	-	-	-	6. 15
			0:Disabled
			1:High-speed operation speed set automatically
			(Power running at F command: Increase)
￿￿￿￿￿	0328	Light-load high-speed operation	2:High-speed operation speed set automatically	1/1	0	Disabled	￿/￿	-	￿	￿	*1
		selection	(Power running at R command: Increase)
			3:High-speed operation speed set with ￿￿￿￿
			(Power running at F command: Increase)
			4:High-speed operation speed set with ￿￿￿￿
			(Power running at R command: Increase)
￿￿￿￿￿	0329	Light-load high-speed learning function	0:No learning, 1:Forward run learning	1/1	0	Disabled	￿/￿	-	-	-	*1
			2:Reverse run learning
￿￿￿￿￿	0330	Automatic light-load high-speed	30.0~￿￿ Hz	0.1/0.01	*2	Enabled	￿/￿	-	￿	￿	*1
		operation frequency
￿￿￿￿￿	0331	Light-load high-speed operation	5.0~￿￿ Hz	0.1/0.01	40.0	Enabled	￿/￿	-	￿	￿	*1
		switching lower limit frequency
￿￿￿￿￿	0332	Light-load high-speed operation	0.0~10.0 sec.	0.1/0.1	0.5	Enabled	￿/￿	-	￿	￿	*1
		load waiting time
￿￿￿￿￿	0333	Light-load high-speed operation	0.0~10.0 sec.	0.1/0.1	1.0	Enabled	￿/￿	-	￿	￿	*1
		load detection time
￿￿￿￿￿	0334	Light-load high-speed operation	0.0~10.0 sec.	0.1/0.1	0.5	Enabled	￿/￿	-	￿	￿	*1
		heavy load detection time
￿￿￿￿￿	0335	Switching load torque during	-250~250%	1/0.01	50	Enabled	￿/￿	-	￿	￿	*1
		power running
￿￿￿￿￿	0336	Heavy-load torque during power running	-250~250%	1/0.01	100	Enabled	￿/￿	-	￿	￿	*1
￿￿￿￿￿	0337	Heavy-load torque during	-250~250%	1/0.01	50	Enabled	￿/￿	-	￿	￿	*1
		constant power running
￿￿￿￿￿	0338	Switching load torque during	-250~250%	1/0.01	50	Enabled	￿/￿	-	￿	￿	*1
		regenerative braking
￿￿￿￿￿	0340	Creeping time 1	0.00~2.50 sec.	0.01/0.01	0	Enabled	￿/￿	-	-	-	6. 17
￿￿￿￿￿	0341	Braking mode selection	0:Disabled, 1:Forward winding up	1/1	0	Disabled	￿/￿	-	-	-	6. 17
			2:Reverse winding up, 3:Horizontal operation
			0:Disabled, 1:VI/II (voltage/current input)
			2:RR/S4 (potentiometer/voltage input)
			3:RX (voltage input)
￿￿￿￿￿	0342	Load portion torque input	4:￿￿￿￿enabled	1/1	4	Enabled	￿/￿	-	-	-	6. 17
		selection	5:2-wire RS485 communication input
			6:4-wire RS485 communication input
			7:Communications option input enabled
			8:Optional AI1 (differential current input)
￿￿￿￿￿	0343	Hoisting torque bias input (valid	-250~250%	1/0.01	100	Enabled	￿/￿	-	-	-	6. 17
		only when ￿￿￿￿=￿)
￿￿￿￿￿	0344	Lowering torque bias multiplier	0~100%	1/0.01	100	Enabled	￿/￿	-	-	-	6. 17
￿￿￿￿￿	0345	Brake release time	0.00~2.50 sec.	0.01/0.01	0.05	Enabled	￿/￿	-	-	-	6. 17
￿￿￿￿￿	0346	Creeping frequency	￿￿￿￿~20.0 Hz	0.1/0.01	3.0	Disabled	￿/￿	-	-	-	6. 17
￿￿￿￿￿	0347	Creeping time 2	0.00~2.50 sec.	0.01/0.01	0.10	Enabled	￿/￿	-	-	-	6. 17
*1: ￿ For details, refer to Instruction Manual (E6581327) specified in Section 6.42. *2: Inverter with a model number ending with						-WN, HN: 60.0 -WP: 50.0

11

!

!

E6581301