Toshiba VF-AS1 Setting parameters by operating method, Automatic function setting, Vi/Ii

E6581301

5.4Setting parameters by operating method

￿￿￿￿￿: Automatic function setting

•Function

Automatically programs all parameters (parameters described below) related to the functions by selecting the inverter's operating method.

The major functions can be programmed simply.

[Parameter setting]

Title	Function	Adjustment range	Default setting
		￿:Disabled
		￿:Frequency setting by means of voltage
		￿:Frequency setting by means of current
￿￿￿￿	Automatic function setting	￿:Voltage/current switching from external terminal	￿
		￿: Frequency setting on operation panel and operation by
		means of terminal
		￿: Frequency setting and operation on operation panel

Example:" When setting the parameter "￿￿￿#￿", It will be the following indication.￿

" " " ￿￿￿￿￿	￿￿￿￿￿￿ ￿￿￿￿￿
ENT	3 times	ENT

Automatically programmed functions and parameter set values

￿￿￿￿￿

ENT

￿￿￿￿￿￿

A present set value is shown.

						￿: Frequency		5
			￿:Frequency	￿:Frequency	￿:Voltage/current	setting on	￿: Frequency
￿	Default	￿:Disabled￿	setting by	setting by	switching from	operation panel	setting and
	setting		means of	means of	external	and operation	operation on
			voltage	current	terminal	by means of	operation panel
						terminal
￿￿￿￿￿	￿:Terminal	–	–	–	–	￿:Terminal board	￿:Operation panel
	board
￿￿￿￿￿	￿:RR/S4	–￿	￿:RR/S4	￿:VI/II	￿:RR/S4	￿:Operation	￿:Operation
						panel	panel
￿￿￿￿￿	￿:Voltage	–	–	￿:Current input	￿:Current input	–	–
	input￿
	￿￿:
￿￿￿￿	Preset	–	–	–	￿￿￿:Frequency	–	–
(S3)￿	speed				priority switching
	command 3
	￿:￿￿￿￿/		￿:￿￿￿￿/	￿:￿￿￿￿/	￿:￿￿￿￿/	￿:￿￿￿￿/	￿:￿￿￿￿/
	￿￿￿￿￿
￿￿￿￿￿		–￿	￿￿￿￿terminal	￿￿￿￿terminal	￿￿￿￿terminal	￿￿￿￿terminal	￿￿￿￿terminal
	terminal
	switching		switching	switching	switching	switching	switching
￿￿￿￿￿	￿ %	–	–	￿￿ %￿	￿￿ %	–	–
￿￿￿￿￿	￿:VI/II	–￿	￿:RR/S4	￿:VI/II	￿:VI/II	￿:Operation	￿:Operation
						panel	panel

￿Refer to Section 11 for input terminal functions.

Disabled (￿￿￿=￿)

No change is made to the parameter setting.

Frequency setting by means of voltage: (￿￿￿=￿)

Operation is performed by applying a voltage for setting the RR/S4 terminal 1 frequency.

When sink logic is selected:

ST-CC ON: Standby (ON (short-circuited) by default)

F-CC ON: Forward run

R-CC ON: Reverse run

Frequency setting by means of current

This setting is used to set the frequency by applying a current of 4-20mA to the VI/II terminal.

ST-CC ON: Standby (ON (short-circuited) by default)

F-CC ON: Forward run

R-CC ON: Reverse run

E-5