Toshiba VF-AS1 instruction manual Setting parameters in the standard setting mode

! !E6581301

4.1.2 Setting parameters in the standard setting mode

Press the MODE key to place the inverter in this mode.

■How to set basic parameters

(1)Selects parameter to be changed.

(Press the or key.)

(2)Reads the programmed parameter setting. (Press the ENT key.)

(3)Change the parameter value.

Standard monitor mode (Press the or key.)

(4)Press this key to save the change. (Press the ENT key.)

50 kinds ofstandardparameter				*	Basic parametersetting
are displayed
							Extended
							parameter
						*
							setting
					* Parameter title and the
	Enter key	Select key	Mode key		setting value are displayed
	Used to set values	Used to select	Used to select mode		alternately.
	and return to	item	and operation level		.

previous menu

4

■How to set extended parameters

Each extended parameter is composed of an “￿” and three figures that follow the f, so first select and read out the heading of the parameter you want “￿￿￿￿” ~ “￿￿￿￿.” (“￿￿￿￿”:Parameter bearing a number between 100 and 199, “￿￿￿￿”:Parameter bearing a number between 900 and 999)

(1)Select the title of the parameter you want to change. (Press the or key.)

(2)Press the Enter key to activate the selected parameter. (Press the ENT key.)

(3)Selects parameter to be changed. (Press the or key.)

(4) Reads the programmed parameter setting. (Press the ENT key.)

(5)Change the parameter value. (Press the or key.)

(6)Press this key to save the change. (Press the ENT key.)

D-3