Toshiba VF-AS1 instruction manual 13.1, 13.2, 14.3, 14.4, 14.5

!			E6581301!
5.17	PWM carrier frequency ·································································································································		E-31
5.18	Trip-less intensification ·································································································································		E-32
5.18.1		Auto-restart (Restart during coasting)····································································································	E-32

5.18.2Regenerative power ride-through control/Deceleration stop during power failure/

			Synchronized acceleration/deceleration·······································································································	E-33
	5.19	Dynamic (regenerative) braking - For abrupt motor stop ··············································································		E-36
	5.20	Standard default setting ································································································································		E-42
	5.21	Searching for all reset parameters and changing their settings ····································································		E-44
	5.22	EASY key function ········································································································································		E-45
6.	Extended parameters···········································································································································			F-1
	6.1	Input/output parameters································································································································		F-1
	6.1.1		Low-speed signal···································································································································	F-1
	6.1.2		Putting out signals of arbitrary frequencies····························································································	F-2
	6.2	Input signal selection ····································································································································		F-3
	6.2.1		Priority when forward/reverse run commands are entered simultaneously············································	F-3
	6.2.2		Assigning priority to the terminal board in the operation panel and operation mode ·····························	F-4
	6.2.3		Analog input signal switching·················································································································	F-5
	6.3	Terminal function selection····························································································································		F-6
	6.3.1		Keeping an input terminal function always active (ON)··········································································	F-6
	6.3.2		Modifying input terminal functions ·········································································································	F-6
	6.3.3		Using the servo lock function·················································································································	F-8
	6.3.4		Modifying output terminal functions ·······································································································	F-8
	6.3.5		Response time of input/output terminals································································································	F-9
	6.3.6		Using the V/f adjustment function ········································································································	F-9
	6.4	Basic parameters 2·······································································································································		F-9
	6.4.1		Switching among V/f characteristics 1, 2, 3 and 4 from input terminal···················································	F-9
	6.5	V/f 5-point setting··········································································································································		F-11
	6.6	Speed command switching ···························································································································		F-11
	6.6.1		Using two types of frequency !speed" commands················································································	F-11
	6.7	Operation frequency ·····································································································································		F-13
	6.7.1		Start frequency#Stop frequency·············································································································	F-13
	6.7.2		Run/Stop control with frequency setting signals ····················································································	F-13
	6.7.3		Frequency setting signal 0Hz dead zone handling function···································································	F-14
	6.8	DC braking····················································································································································		F-14
	6.8.1		DC braking·············································································································································	F-14
	6.8.2		Motor shaft fixing control························································································································	F-16
	6.8.3		Function of issuing a 0Hz command during a halt·················································································	F-17
	6.9	Auto-stop in case of lower-limit frequency continuous operation (Sleep/Wake-up function) ·························		F-18
	6.10	Jog run mode················································································································································		F-19
	6.11	Setting frequency via external contact input (Motor operated pot mop setting) ············································		F-20
	6.12	Jump frequency - jumping resonant frequencies ··························································································		F-22
	6.13	Preset speed operation frequencies ·············································································································		F-23
	6.13.1		Preset speed operation frequency 8 to 15·····························································································	F-23
	6.13.2		Forced oeration control··························································································································	F-23
	6.14	Trip-less intensification ·································································································································		F-24
	6.14.1		Retry function ········································································································································	F-24
	6.14.2		Avoiding overvoltage tripping·················································································································	F-25
	6.14.3		Output voltage adjustment/Supply voltage correction············································································	F-25
	6.14.4		Reverse run prohibition··························································································································	F-27
	6.14.5		Output voltage waveform selection········································································································	F-27
	6.15	Drooping control ···········································································································································		F-27
	6.16	Light-load high-speed operation function······································································································		F-29
	6.17	Braking function············································································································································		F-29
	6.18	Acceleration/deceleration suspend function··································································································		F-31
	6.19	Commercial power/inverter switching ···········································································································		F-32
	6.20	PID control ····················································································································································		F-34
	6.21	Stop position control function························································································································		F-38

ii