Toshiba VF-AS1 instruction manual Off

! E6581301!

[Note 5]

[Note 5]

[Note 5]

[Note 5]

[Note 6]

[Note 7]

(Continued)

Commun			Key	LED
ication	Item displayed							Description
			operated	display
No.
FE08	CPU1 version			￿￿￿￿￿	The version of the CPU1 is displayed.
FE73	CPU2 version			￿￿￿￿￿	The version of the CPU2 is displayed.
FE10	Past trip 1			￿￿￿⇔￿	Past trip 1 (displayed alternately at 0.5-sec. intervals)
FE11	Past trip 2			￿￿! ⇔￿	Past trip 2 (displayed alternately at 0.5-sec. intervals)
FE12	Past trip 3			￿￿￿⇔￿	Past trip 3 (displayed alternately at 0.5-sec. intervals)
FE13	Past trip 4			￿￿￿￿⇔￿	Past trip 4 (displayed alternately at 0.5-sec. intervals)
					The ON/OFF status of each of the cooling fan, circuit
					board capacitor, main circuit capacitor or part
					replacement alarm of cumulative operation time is
					displayed in bits.
					ON:￿
	Part replacement						￿￿￿￿￿￿!￿
FE79				￿￿￿￿￿￿￿	OFF:￿
	alarm information
						Cumulative			Cooling fan
					operation time				Control circuit board
									capacitor
									Main circuit capacitor
FE14	Cumulative			￿ ￿￿￿￿	The cumulative operation time is displayed.
	operation time				(Indication of 0.1 represents 10 hours.)
	Default display		MODE	￿￿￿￿	The operation frequency is displayed (during operation).
	mode
			[Note 1]
										8
Note 1: Press the		keys to change items displayed in the status monitor mode.

Note 2: Contents of status indications of *1, *2, *3, *4, *5, *6, *7, *8, and *9 can be selected from 44 kinds of

information.

Contents of status indications that are set up at ￿￿￿￿ (standard monitor display selection) and

￿￿￿￿~￿￿￿￿ (status monitor 1 to 8 display selection) are displayed.

Unit of current and voltage indications can be changed from % to A (ampere)/V (volt) and vice versa respectively. ￿ Refer to Section 5.15.

Note 3: Indicated input voltage is DC voltage just after input voltage is rectified multiplied by 1 2 .

Note 4: The number of bars displayed varies depending on the setting of ￿￿￿ (logic output/pulse train output

selection.)

The bar representing the OUT1 terminal is displayed only when logic output function is assigned to it. If ￿￿￿ =￿: The bar representing OUT1 is displayed.

If ￿￿￿ =￿: The bar representing OUT1 is not displayed.

Note 5: Past rip records are displayed in the following sequence: 1 (latest trip record) ⇔2⇔3⇔4 (oldest trip record). If there is no trip record, ￿￿￿￿ is displayed.

Details on past trip record 1, 2, 3 or 4 can be displayed by pressing the ENT key when past trip 1, 2, 3 or

4 is displayed. ￿ For more details, refer to Section 8.2.2.

Note 6: The part replacement alarm is displayed based on the value calculated from the annual average ambient temperature, operation time and load current specified using ￿￿￿￿.

Use this alarm as a guide only, since it is based on a rough estimation.

Note 7: The cumulative operation time increments only when the machine is in operation.

H-3