Toshiba VF-AS1 instruction manual Suppression Supply Filter *4 Backup, CPS002Z

!								E6581301
	Selection table of separate-type options (2/2)
		Appli-cable			DC reactor		Motor end		Control
	Voltage		Inverter	Input AC reactor		Braking resistor	surge voltage		power
	class	motor	model	(ACL)	(DCL)	(*1)	suppression		supply
		[kW]			(*6)
							filter (*4)		backup
		0.4	VFAS1-2004PL	PFL-2005S	DCL3-4015 (*5)	PBR-2007
		0.75	VFAS1-2007PL		DCL3-2007
		1.5	VFAS1-2015PL	PFL-2011S	DCL3-2015	PBR-2002
		2.2	VFAS1-2022PL		DCL3-2022
		3.7/4.0	VFAS1-2037PL	PFL-2018S	DCL3-2037	PBR-2037
		5.5	VFAS1-2055PL	PFL-2025S	DCL3-2055	PBR7-004W015
		7.5	VFAS1-2075PL	PFL-2050S	DCL3-2075
	200V	11	VFAS1-2110PM
		15	VFAS1-2150PM			PBR7-008W7R5	–
	class
		18.5	VFAS1-2185PM	PFL-2100S
		22	VFAS1-2220PM		Built-in	PBR7-017W3R7
		30	VFAS1-2300PM	PFL-2150S
		37	VFAS1-2370PM
		45	VFAS1-2450PM	PFL-2200S		PBR7-035W1R8
		55	VFAS1-2550P	PFL-2300S
		75	VFAS1-2750P	PFL-2400S	Attached as standard	DGP600W-B1
						[DGP600W-C1]
		0.75	VFAS1-4007PL		DCL3-4007		MSF-4015Z
		1.5	VFAS1-4015PL	PFL-4012S	DCL3-4015	PBR-2007
		2.2	VFAS1-4022PL		DCL3-4022		MSF-4037Z
		3.7/4.0	VFAS1-4037PL		DCL3-4037	PBR-4037
		5.5	VFAS1-4055PL		DCL3-4055	PBR7-004W060	MSF-4075Z
		7.5	VFAS1-4075PL	PFL-4025S	DCL3-4075
		11	VFAS1-4110PL		DCL3-4110		MSF-4150Z
		15	VFAS1-4150PL		DCL3-4150	PBR7-008W30
		18.5	VFAS1-4185PL	PFL-4050S			MSF-4220Z
		22	VFAS1-4220PL			PBR7-017W15			CPS002Z
		30	VFAS1-4300PL				MSF-4370Z
		37	VFAS1-4370PL	PFL-4100S	Built-in
		45	VFAS1-4450PL			PBR7-017W7R5	MSF-4550Z
		55	VFAS1-4550PL	PFL-4150S
		75	VFAS1-4750PL			PBR7-017W3R7	MSF-4750Z
		90	VFAS1-4900PC	PFL-4300S			MSL-4215T
		110	VFAS1-4110KPC			DGP600W-B2	MSL-4314T
	400V
		132	VFAS1-4132KPC			[DGP600W-C2]
	class			PFL-4400S
		160	VFAS1-4160KPC
		200	VFAS1-4200KPC			PB7-4200K(*2)	MSL-4481T
				PFL-4600S		DGP600W-B3
						[DGP600W-C3]
		220	VFAS1-4220KPC
						PB7-4200K(*2)
		280	VFAS1-4280KPC	PFL-4800S	Attached as standard	DGP600W-B4
						[DGP600W-C4]
							MSL-4759T
						PB7-4400K(*2)
		355	VFAS1-4355KPC	PFL-4450S		DGP600W-B3
10						×2(parallel)
				×2(parallel)
		400	VFAS1-4400KPC			[DGP600W-C3
						×2(parallel)]
						PB7-4400K(*2)	MSL-41188T
				PFL-4613S		DGP600W-B4
		500	VFAS1-4500KPC			×2(parallel)
				×2(parallel)
						[DGP600W-C4
						×2(parallel)]

(*1): Model in square brackets is fitted with top cover.

(*2): To use a 400V/200kW inverter or larger in combination with an external braking resistor (DGP600 series), a braking unit (PB7) with a built-in braking resistor drive circuit is also needed.

(*3): The options are selected based on the premise that 600V HIV insulated wires (continuous allowable temperature: 75°C) are used.

(*4): Each MSF-****Z model is composed of a reactor, a resistor and a capacitor, and as a guide, use a cable 300m or less in length to connect the inverter to the motor.

Each MSL-****T model is an output-dedicated surge suppression reactor, and as a guide, use a cable 100m or less in length (or 50m or less for a shielded cable) to connect the inverter to the motor, although allowable cable lengths vary according to the input voltage.)

(*5): These reactors are usable for each of 200V class and 400V class.

(*6): Be sure to connect DC reactor to 200V-55kW or more or 400V-90kW or more inverter. (Not necessary for DC power input.)

When a 200V-55kW or more inverter or 400V-90 to 280kW inverter is replaced with new one, the reactor (model: DCL-****) used with the current inverter can be used as-is with the new inverter. In such cases, therefore, you do not need to purchase any reactors in this table.

J-8