Toshiba VF-AS1 instruction manual Acquisition of trace data

			E6581301
[Setup values of ￿￿￿￿~￿￿￿￿]
Default setting	Communication	Trace (monitor) function	Communication
	No.		unit at tracing
￿￿	FD00	Output frequency	0.01Hz
￿￿	FD02	Frequency command value	0.01Hz
￿￿	FD03	Output current	0.01%
￿￿	FD04	Input voltage (DC detection)	0.01%
￿￿	FD05	Output voltage	0.01%
￿￿	FD15	Compensated frequency	0.01Hz
￿￿	FD16	Speed feedback (real-time value)	0.01Hz
￿￿	FD17	Speed feedback (1-second filter)	0.01Hz
￿￿	FD18	Torque	0.01%
￿￿	FD19	Torque command	0.01%
￿￿￿	FD20	Torque current	0.01%
￿￿￿	FD21	Exciting current	0.01%
￿￿￿	FD22	PID feedback value	0.01
￿￿￿	FD23	Motor overload factor (OL2 data)	0.01%
￿￿￿	FD24	Inverter overload factor (OL1 data)	0.01%
￿￿￿	FD25	Regenerative braking resistance overload factor (OLr	1%
		data)
￿￿￿	FD28	Regenerative braking resistor load factor (% ED)	1%
￿￿￿	FD29	Input power	0.01kW
￿￿￿	FD30	Output power	0.01kW
￿￿￿	FE39	Optional AI2 input	0.01%
				6
￿￿￿	FE35	RR/S4 input	0.01%
￿￿￿	FE36	VI/II input	0.01%
￿￿￿	FE37	RX input	0.01%
￿￿￿	FE38	Optional AI1 input	0.01%
￿￿￿	FE40	FM output	0.01%
￿￿￿	FE41	AM output	0.01%
￿￿￿	FE76	Integral input power	0.01kWhr
￿￿￿	FE77	Integral output power	0.01kWhr
￿￿￿	FE60	My function monitor 1	1c
￿￿￿	FE61	My function monitor 2	1c
￿￿￿	FE62	My function monitor 3	1c
￿￿￿	FE63	My function monitor 4	1c

■Acquisition of trace data

Trace data is acquired through a communication device. The VF-AS1 supports the protocols listed below.

• RS485 (Standard protocol)

F-79