Toshiba VF-AS1 instruction manual Models and their standard specifications

! E6581301

12.Specifications

12.1Models and their standard specifications

1)Standard specifications (small/medium capacity types)

	Item																Specification
Voltage class																	200V class
Applicable motor (kW)			0.4		0.75		1.5		2.2		3.7/4.0			5.5			7.5			11				15				18.5			22		30		37			45
Applicable motor (HP)			0.5		1		2		3		5			7.5			10			15				20				25			30		40		50			60
	Type																	VFAS1-
	Form		2004PL		2007PL		2015PL		2022PL		2037PL			2055PL			2075PL			2110PM			2150PM				2185PM			2220PM		2300PM			2370PM		2450PM
	Output capacity (kVA)		1.1		1.8		3.0		4.2		6.7			10			13			21				25				29			34		46		55			67
Rating	[Note 1]
	Output current		3.0		4.8		8.0		11		17.5			27.5			33			54				66				75			88		120		144			176
	(A)	[Note 2]	(3.0)		(4.5)		(8.0)		(10.5)		(16.6)			(25.0)			(33)			(49)				(64)				(66)		(75)			(88)		(120)			(140)
	Output voltage				Three-phase 200V~240V (The maximum output voltage is equal to the input supply voltage.)
	Overload													150%-1 minute, 165%-2 sec.
	current rating
Electrical braking	Dynamic												Built-in dynamic braking drive circuit
	braking circuit
	Dynamic braking											An external braking resistor (optional)
	resistor													! ￿ Rating: Refer to 5.19.
Power supply	Voltage-frequency						! ! ! ! ! ! ! ! ! Three-phase 200~240V-50/60Hz																			[Note 3]
	Allowable									Voltage + 10% - 15%									[Note 4]					Frequency ±5%
	fluctuation
Protective method									IP20 Enclosed type																				IP00 Open type						[Note 5]
(IEC60529)
Cooling method																Forced air-cooled
Cooling fan noise (dBA)			43		43		43		55		55			56			58			60				60				60			60		64		64			64
Color																	RAL7016
EMC filter									Built-in											Basic filter (Not complies with the European EMC Directive)
DC reactor						External DC reactor (option)																								Built-in
	Item																Specification
Voltage class																	400V class
Applicable motor (kW)			0.75		1.5	2.2		3.7/4.0		5.5			7.5			11			15			18.5				22			30		37			45		55		75
Applicable motor (HP)			1		2	3		5		7.5			10			15			20			25				30			40		50			60		75		100
	Type																	VFAS1-
	Form		4007PL	4015PL		4022PL		4037PL		4055PL		4075PL			4110PL			4150PL			4185PL				4220PL				4300PL		4370PL			4450PL		4550PL		4750PL
	Output capacity (kVA)		1.8		3.1	4.4		8.0		11			13			21			25			31				37			50		60			72		88		122
Rating	[Note 1]
	Output current		2.3		4.1	5.8		10.5		14.3			17.6			27.7			33			41				48			66		79			94		116		160
	(A)	[Note 2]	(2.3)		(4.0)	(4.6)		(8.6)		(13)			(17)			(25)			(32)			(37)				(38)			(53)		(60)			(75)		(93)		(120)
	Output voltage				Three-phase 380V~480V (The maximum output voltage is equal to the input supply voltage.)
	Overload													150%-1 minute, 165%-2 sec.
	current rating
Electrical braking	Dynamic												Built-in dynamic braking drive circuit
	braking circuit
	Dynamic braking											An external braking resistor (optional)
	resistor													! ￿ Rating: Refer to 5.19.
Power supply	Voltage-frequenc				! ! !	! ! !		! ! ! !		! ! ! !			!	Three-phase 380~480V-50/60Hz														[Note 3]
	Allowable
	y
	fluctuation									Voltage + 10% - 15%									[Note 4]					Frequency ±5%															12
Protective method									IP20 Enclosed type																				IP00 Open type [Note 5]
(IEC60529)
Cooling method																Forced air-cooled
Cooling fan noise (dBA)			43		43	43		55		56			56			58			60			60				60			64		64			64		64		64
Color																	RAL7016
EMC filter																		Built-in
DC reactor							External DC reactor (option)																								Built-in

Note 1: Capacity is calculated at 220V for the 200V models and at 440V for the 400V models.

Note 2: Rated output current when the PWM carrier frequency (parameter ￿￿) is 4kHz or less.

The values between parentheses refer to rated output currents when set to 12kHz.

￿Refer to 1.4.4 ”Current reduction curve” for details.

Note 3: If you are using a 200V-15kW or 400V-2.2kW inverter and the ambient temperature is 40°C or mor e, decrease the PWM carrier frequency to 8kHz. Setting ￿￿￿￿ to ￿ enables you to protect the overload caused by ambient temperature described in page A-23.

An external power supply backup available (optional) (Type: CPS002Z)

Note 4: ±10% when the inverter is used continuously (load of 100%).

Note 5: HN models, 200V-18.5!45kW and 400V-22!75kW are IP20 enclosed type.

L-1