42-6
Cisco Unified Communications Manager Administration Guide
OL-18611-01
Chapter 42 Route Group Configuration
Removing Devices from a Route Group
Additional Information
See the “Related Topics” section on page 42-7.
Removing Devices from a Route Group
You can remove devices from a new route group or from an existing route group. The following
procedure describes removing a device from an existing route group.
Procedure
Step 1 Choose Call Routing > Route/Hunt > Route Group.
Step 2 Locate the route group from which you want to remove a device. See the “ Findi ng a R oute Gro up”
section on page 42-3.
Step 3 In the Selected Devices list box, choose a device to be removed and click the Down arrow below the
Selected Devices list box to move the device to the Remove d Devices list box. Repeat this step for each
device that you want to remove from this route group.
Note You must leave at least one device in a route group.
Step 4 To remove the devices, click Save.
Additional Information
See the “Related Topics” section on page 42-7.
Deleting a Route Group
The following procedure describes how to delete a route group.
Before You Begin
You cannot delete a route group that a route/hunt list references. To find out which route lists are using
the route group, in the Route Group Configuration window, choose Dependency Records from the
Related Links drop-down list box and click Go. If the dependency records are not enabled for the system,
the Dependency Records Summary window displays a message. For more information about dependency
records, refer to the “Accessing Dependency Records” section on page A-2. If you try to delete a route
group that is in use, Cisco Unified Communications Manager displays a message . Before deleting a route
group that is currently in use, you must perform the following task :
• Remove the route group from all route lists to which it belongs before deleting the route group. Se e
the “Removing Route Groups from a Route List” section on page 43-5.
Tip To delete route groups and route patterns, first delete the route pattern; second, delete the route list; a nd
finally, delete the route group.