90-7
Cisco Unified Communications Manager Administration Guide
OL-18611-01
Chapter 90 Gateway Configuration Gateway Configuration Settings
ASN.1 ROSE OID Encoding To display the options in the ASN.1 ROSE OID Encoding drop-down
list box, choose QSIG from the Tunneled Protocol drop-down list box.
This parameter specifies how to encode the Invoke Object ID (OID) for
remote operations service element (ROSE) operations.
From the drop-down list box, choose one of the following options:
• No Changes.
• Not Selected
• Use Global Value (ISO)—Select this option only if the connected
PBX does not support Local Value.
• Use Global Value (ECMA)—Select this option only if the QSIG
Variant service parameter is set to ECMA (Protocol Profile 0x91).
• Use Local Value—(Default) Use this option that is supported by
most telephony systems when the QSIG Variant service parameter
is set to ISO (Protocol Profile 0x9F).
For more information, see the following information:
• Be aware that ASN.1 ROSE OID Encoding can also be defined as
a clusterwide parameter. For more information, refer to
Chapter 25, “Service Parameters Configuration.”
• For information on QSIG support with Cisco Unified
Communications Manager, refer to “Q.Signaling (QSIG)” in the
“Understanding IP Telephony Protocols” chapter of the Cisco
Unified Communications Manager System Guide.
Table 90-2 H.323 Gateway Configuration Settings (continued)
Field Description