78-5
Cisco Unified Communications Manager Administration Guide
OL-18611-01
Chapter 78 Transcoder Configuration Resetting a Transcoder
Resetting a Transcoder
This section describes how to reset a Transcoder.
Procedure
Step 1 Choose Media Resources > Transcoder.
Step 2 From the Transcoders list, choose the transcoder that you want to reset.
The window refreshes and displays the transcoder that you chose.
Step 3 Click Reset.
The Reset dialog box displays.
Step 4 Click Reset again.
Additional Information
See the “Related Topics” section on page 78-6.
Synchronizing a Transcoder
To synchronize a transcoder with the most recent configuration changes, perform the following
procedure, which will apply any outstanding configuration settings in the least-intrusive manner
possible. (For example, a reset/restart may not be required on some affected devices.).
Procedure
Step 1 Choose Media Resources > Transcoder.
The Find and List Transcoders window displays.
Step 2 Choose the search criteria to use.
Step 3 Click Find.
The window displays a list of transcoders that match the search criteria.
Step 4 Check the check boxes next to the transcoders that you want to synchronize. To choose all transcoders
in the window, check the check box in the matching records title bar.
Step 5 Click Apply Config to Selected.
The Apply Configuration Information dialog displays.
Step 6 Click OK.
Additional Information
See the “Related Topics” section on page 78-6.