52-6
Cisco Unified Communications Manager Administration Guide
OL-18611-01
Chapter 52 Partition Configuration
Deleting a Partition
Step 2 Choose the search criteria to use.
Step 3 Click Find.
The window displays a list of partitions that match the search criteria.
Step 4 Click the partition to which you want to synchronize applicable devices. The Partition Configuration
window displays.
Step 5 Make any additional configuration changes.
Step 6 Click Save.
Step 7 Click Apply Config.
The Apply Configuration Information dialog displays.
Note If devices that are associated with the partition get reset, all calls on affected gateways drop.
Step 8 Click OK.
Additional Information
See the “Related Topics” section on page 52-7.
Deleting a Partition
The following procedure describes how to delete a partition.
Before You Begin
You cannot delete a partition if it is assigned to an item such as calling se arch spac e or to a route patte rn.
To find out which calling search spaces or other items are using the partition, choos e Dependency
Records from the Related Links drop-down list box in the Partition Configuration window and click Go.
If the dependency records are not enabled for the system, the dependency records summary window
displays a message. For more information about dependency records, refer to the “Accessing
Dependency Records” section on page A-2. If you try to delete a partition that is in use, Cisco Unified
Communications Manager displays a message. Before deleting a partition that is currently in use, you
must perform either or both of the following tasks:
• Assign a different partition to any calling search spaces, devices, or other items that are using the
partition that you want to delete.
• Delete the calling search spaces, devices, or other items that are using the partition that you want to
delete.
Procedure
Step 1 In the menu bar, choose Call Routing > Class of Control > Partition.
Step 2 Locate the partition that you want to delete. See the “Finding a Partition” section on page 52-3.
Step 3 Check the check box of the partition that you want to de lete and c lick Delete Selected.