90-66
Cisco Unified Communications Manager Administration Guide
OL-18611-01
Chapter 90 Gateway Configuration
Port Configuration Settings
Network Locale From the drop-down list box, choose the locale that is associated
with the gateway. The network locale identifies a set of detailed
information to support the hardware in a specific location. The
network locale contains a definition of the tones and cadences tha t
the device uses in a specific geographic area.
Note Choose only a network locale that is already installed and
supported by the associated devices. The list contains all
available network locales for this setting, but not all are
necessarily installed. If the device is associated with a
network locale that it does not support in the firmware, the
device will fail to come up.
SMDI Base Port Enter the first SMDI port number of the T1 span.
If you set this parameter to a nonzero value and this gateway
belongs to an unknown type of route list, route group, or route list,
hunting does not continue past this span.
Table 90-8 Digital Access T1 Port Configuration Settings (continued)
Field Description