90-85
Cisco Unified Communications Manager Administration Guide
OL-18611-01
Chapter 90 Gateway Configuration Port Configuration Settings
Additional Information
See the “Related Topics” section on page 90-104.
Ground-Start Port Configuration Settings
Table 90-12 describes the ground-start port configuration settings.
Product-Specific Configurations
Model-specific
configuration fields that the
gateway manufacturer
defines
The gateway manufacturer specifies the model-specific fields under
product-specific configuration. Because they are dynamically
configured, they can change without notice.
To view field descriptions and help for product-specific configuration
items, click the “?” information icon to the right of the Product Specific
Configuration heading to display help in a popup dialog box.
If you need more information, refer to the documentation for the s pecific
gateway that you are configuring or contact the manufacturer.
Table 90-11 Loop-Start Port Configuration Settings (continued)
Field Description
Tab le 90-12 Ground-Start Port Configuration Settings
Field Description
Port Type From the Port Type drop-down list box, choose Ground Start.
Beginning Port Number
Ending Port Number
Choose whether you want to add and configure all available ports, a single
port, or a range of ports by setting values for the Beginning Port Number
and Ending Port Number fields:
• To specify a range of ports, choose appropriate values for Beginning
Port Numbe r and Ending Port Number.
• To create a single port, choose the same numb er in the Be ginning P ort
Number and Ending Port Number fields.
• To add all available ports, choose All Ports for both the Beginning
Port Numbe r and Ending Port Number fields.
Port Direction Choose the direction of calls that pass through this port:
• Inbound—Use for incoming calls only.
• Outbound—Use for outgoing calls.
• Both Ways—Use for inbound and outbound calls.
Attendant DN Enter the number to which you want incoming calls to be routed; for
example, zero or a directory number for an attendant.
Unattended Port Check this check box to indicate an unattended port on this device.