90-95
Cisco Unified Communications Manager Administration Guide
OL-18611-01
Chapter 90 Gateway Configuration Adding Gateways to Cisco Unified Communications Manager
Step 4 From the Gateway Configuration window, click the endpoint identifier of the Digital Access T1
(T1-CAS) port that you want to configure.
In the Device Protocol drop-down list box that displays, choose Digital Access T1 and click Next.
See the “Finding Specific Gateways” section on page 90-88 for the appropriate settings for the port type
that you choose.
Step 5 Enter the appropriate Gateway Configuration settings. See the “Digital Access T1 Port Configuration
Settings” section on page 90-62 for details.
Step 6 Click Save.
Step 7 To reset the gateway and apply the changes, click Reset.
Additional Information
See the “Related Topics” section on page 90-104.
Adding a Digital Access PRI Device to an MGCP Gateway
Step 1 To display the Find and List Gateways window, choose Device > Gateway or skip to Step 4 if you have
already located the MGCP gateway to which you want to add a port.
Step 2 To locate the MGCP gateway to which you want to add a T1 PRI or E1 PRI port, enter the appropriate
search criteria.
Step 3 To display the configuration information for the selecte d gateway, click the name of the desired gateway
in the list.
Step 4 From the Gateway Configuration window, c lick the endpoi nt iden tifi er o f the T1 PRI o r E1 PRI port that
you want to configure.
Step 5 Configure the T1 PRI or E1 PRI device protocol settings. See the “Digital Access PRI Port Configuration
Settings” section on page 90-39 for detailed field descriptions.
Step 6 Click Save.
Step 7 To reset the gateway and apply the changes, click Reset.
Additional Information
See the “Related Topics” section on page 90-104.
Adding a BRI Port to an MGCP Gateway
The device protocols and port types that you can configure on MGCP gat eways vary by the t ype of
installed voice interface cards (VICs). This section contains the procedures for adding a BRI port to an
MGCP gateway.
Procedure
Step 1 To display the Find/List Gateways window, choose Device > Gateway, or if you have already located
the MGCP gateway to which you want to add a port, skip to Step 4.
Step 2 To locate the MGCP gateway to which you want to add a BRI port, enter the appropriate search criteria.