44-10
Cisco Unified Communications Manager Administration Guide
OL-18611-01
Chapter 44 Route Pattern Configuration
Finding a Route Pattern
Additional Information
See the “Related Topics” section on page 44-13.
Finding a Route Pattern
Because you might have several route patterns in your network, Cisco Unified Comm unications Manager
lets you use specific criteria to locate specific route patterns. To locate route patterns, use the following
procedure.
Note During your work in a browser session, Cisco Unified Communications Manager Administration r etains
your route pattern search preferences. If you navigate to other menu items and return to this menu item,
Cisco Unified Communications Manager Administration retains your route pa ttern sea rch p refe renc es
until you modify your search or close the browser.
Procedure
Step 1 Choose Call Routing > Route/Hunt > Route Pattern.
The Find and List Route Patterns window displays. Records from an active (prior) query may also
display in the window.
Carrier Identification
Code Enter the appropriate carrier identification code (0, 3, or 4 digits) in the Carrier
Identification Code field. Carrier identification codes allo w customers to reac h
the services of interexchange carriers.
The following list shows examples of commonly used carrier identification
codes:
• ATT—0288
• Sprint—0333
• WorldCom/MCI—0222
For a complete list of NANP carrier identification codes, go to
http://www.nanpa.com/.
Network Service Choose the appropriate network service. The values vary depending on the
network service protocol that you choose from the Network Service Protocol
field.
Service Parameter
Name This field displays the service parameter name that is associated with the
chosen network service. If no service parameter exists for the network se rvice,
the field displays <Not Exist>.
Service Parameter
Valu e Enter the appropriate service parameter value. Valid entries include the digits
0 through 9. If a service parameter does not exist for the networ k ser vice ,
Cisco Unified Communications Manager Administration disables this field.
Table 44-1 Route Pattern Configuration Settings (continued)
Field Description