CHAPTE R
60-1
Cisco Unified Communications Manager Administration Guide
OL-18611-01
60
Translation Pattern ConfigurationUse the following topics to add, update, copy, or delete a translation pattern:
• Translation Pattern Configuration Settings, page 60-1
• Finding a Translation Pattern, page 60-9
• Configuring a Translation Pattern, page 60-10
• Deleting a Translation Pattern, page 60-11
Translation Pattern Configuration Settings
Cisco Unified Communications Manager uses translation patterns to manipu lat e di al ed di gits be for e i t
routes a call. In some cases, the system does not use the dialed number. In other cases, the public
switched telephone network (PSTN) does not recognize the dialed number.
Table 60-1 describes the available fields in the Translation Pattern Configuration window. For related
procedures, see the “Related Topics” section on page 60-12.
Tab le 60-1 Translation Pattern Configuration Settings
Field Description
Pattern Definition
Translation Pattern Enter the translation pattern, including numbers and wildcards (do not
use spaces), in the Translation Pattern field. For ex a mpl e, for t he NANP,
enter 9.@ for typical local access or 8XXX for a typical private network
numbering plan. Valid characters include the uppercase characters A, B,
C, and D and \+, which represents the international escape character +. If
you leave this field blank, you must select a partition from the Partition
drop-down list box.
Note Ensure that the translation pattern, which uses the chosen
partition, route filter, and numbering plan combination, is
unique. Check the route pattern/hunt pilot, translation pattern ,
directory number, call park number, call pickup number, or
meet-me number if you receive a message that indicates duplicate
entries. Alternatively, check the route plan report if you receive
a message that indicates duplicate entries.