Conventions Used, Client/Student | HP Classroom Manager instruction

Conventions Used

The following logical and easy to understand conventions are used in this manual: -

∙Step-by-step instructions, which should be performed in sequence, are shown as numbered paragraphs, beneath a clearly stated, „How to do‟ heading.

∙As there is often more than one way of carrying out a task you will find „Or‟ options also included.

∙Additional tips or explanatory notes regarding these instructions are enclosed in a border under the heading

„Note‟.

∙Individual items in menu commands are enclosed in braces and should be followed in sequence, for example: {Clients}{Broadcast}.

Terminology Used
Control/Tutor	The workstation that is used to take over another.
Client/Student	The workstation that is to be taken over.
Available Client	When a Client has been installed on a workstation, it becomes available for connection to a
	Control. A Client must be available before a Control can connect to it.
Known Client	Having browsed for available Clients, HP Classroom Manager stores a list of Clients in the
	Client.NSS file. These are Known Clients.
Connected Client	All available Client‟s or Groups of Clients can be chosen for simultaneous connection. A
	Control can only remote control a Client to which they are connected.
Selected Client	A Client or group of connected Clients can be selected by the Control. The Control can then
	perform a variety of functions such as View, Show, Message, etc. A Control can switch
	between multiple Clients, making each of them, in turn, the selected Clients.

∙HP Classroom Manager

∙Restricting Access to the HP Classroom Manager Tutor in an HP MultiSeat Environment

∙Additional HP Classroom Manager manuals