Usage
Information
You can partition the LPM table to store extended IPv6 route prefixes with /65
to /128 mask lengths. LPM CAM partitioning requires a switch reload to take effect.
To disable LPM CAM partitioning and return the number of the IPv6 /65-/128 route
prefixes stored in Partition 1 to 0, enter the no cam-ipv6 extended-prefix
command.
clear ipv6 fib
Clear (refresh) all forwarding information base (FIB) entries on a Z9500 line card.
Z9500
Syntax clear ipv6 fib linecard slot-id
Parameters linecard slot-id Enter the slot ID of a Z9500 line card. Valid slot IDs are from
0 to 2.
Command
Modes
EXEC Privilege
Command
History This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.2(1.0) Introduced on the Z9500.
9.0.0.0 Introduced on the Z9000.
8.3.19.0 Introduced on the S4820T.
8.3.7.0 Introduced on the S4810.
8.2.1.0 Introduced on the E-Series ExaScale.
7.8.1.0 Introduced on the C-Series and S-Series.
7.4.1.0 Introduced on the E-Series TeraScale.
IPv6 Basics 1013