Defaults none
Command
Modes
CONFIGURATION (conf-lldp)
Command
History This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.2(1.0) Introduced on the Z9500.
9.1.(0.0) Modified to support management-address parameter.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.7.1.0 Introduced on the S-Series.
7.6.1.0 Introduced on the C-Series.
7.4.1.0 Introduced on the E-Series.
Usage
Information
The command options management-address,system-capabilities, system-
description, and system-name can be invoked individually or together, in any
sequence.
advertise management-tlv (Interface)Advertise management type, length, values (TLVs) to the specified interface.
Z9500
Syntax advertise management-tlv {management-address | system-
capabilities | system-description | system-name}
To remove advertised management TLVs, use the no advertise management-
tlv {management-address | system-capabilities | system-
description | system-name} command.
Parameters management-
address
Enter the keywords management-address to advertise the
management IP address TLVs to the specified interface.
system-
capabilities
Enter the keywords system-capabilities to advertise the
system capabilities TLVs to the specified interface.
system-
description
Enter the keywords system-description to advertise the
system description TLVs to the specified interface.
system-name Enter the keywords system-name to advertise the system
name TLVs to the specified interface.
Link Layer Discovery Protocol (LLDP) 1177