Dell 9.8(0.0) bfd interval

Command
History This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.2(1.0) Introduced on the Z9500.
9.0.0.0 Introduced on the Z9000.
8.3.19.0 Introduced on the S4820T.
8.3.10.0 Introduced on the S4810.
8.2.1.0 Introduced on the E-Series ExaScale.
7.6.1.0 Introduced on the C-Series.
7.4.1.0 Introduced on the E-Series.
bfd interval
Specify non-default BFD session parameters beginning with the transmission interval.
Z9500
Syntax bfd interval interval min_rx min_rx multiplier value role
{active | passive}
Parameters interval
milliseconds
Enter the keywords interval to specify non-default BFD
session parameters beginning with the transmission interval.
The range is from 50 to 1000. The default is 100.
min_rx
milliseconds
Enter the keywords min_rx to specify the minimum rate at
which the local system would like to receive control packets
from the remote system. The range is from 50 to 1000. The
default is 100.
multiplier value Enter the keywords multiplier to specify the number of
packets that must be missed in order to declare a session
down. The range is from 3 to 50. The default is 3.
role [active |
passive]
Enter the role that the local system assumes:
•Active — The active system initiates the BFD session.
Both systems can be active for the same session.
•Passive — The passive system does not initiate a
session. It only responds to a request for session
initialization from the active system.
The default is Active.
Bidirectional Forwarding Detection (BFD) 349