udf-id
Assign value for each configured UDF ID in the given UDF TCAM profile.
Syntax udf-id id value mask
To return to the default settings, use the no udf-id 1-12 value mask
command.
Parameters id Enter the UDF ID range. The range is from 1 to 12.
value Enter the value for the UDF in Hex, up to 24 bytes.
mask Enter the mask for the UDF in Hex, up to 24 bytes.
Defaults None
Command
Modes
CONFIGURATION-UDF-Qualifier-Value Profile
Example Dell(conf-udf-tcam-qual-val)#udf-id 1 aa ff
Command
History This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.8(0.0) Introduced on the S6000, Z9500.
Related
Commands udf-qualifier-value — creates a UDF qualifier value.
udf-tcam — creates a context for UDF TCAM.
show config — displays the current UDF -Qualifier-Value Profile configuration.
udf-qualifier-value
Create a UDF qualifier value to assign values for all UDF IDs.
Syntax udf-qualifier-value name
To return to the default settings, use the no udf-qualifier-value name
command.
Parameters name Enter the UDF qualifier value profile name, up to 64
characters.
342 Access Control Lists (ACL)