Defaults Not configured.
Command
Modes
ROUTER BGP
Command
History Version Description
9.2(1.0) Introduced on the Z9500.
6.5.1.0 Introduced
Usage
Information
Enter ipv6unicast to enter the BGP for IPv6 mode (CONF-ROUTER_BGPv6_AF).
address family ipv6 unicast
This command changes the context to subsequent address family identifier (SAFI).
Z9500
Syntax address family ipv6 unicast
To remove SAFI context, use the no address family ipv6 unicast
command.
Parameters ipv6 Enter the keyword ipv6 to specify the address family as
IPv6.
unicast Enter the keyword unicast to specify multicast as SAFI.
Defaults IPv6 Unicast
Command
Modes
ROUTER BGPV6-ADDRESS FAMILY
Command
History Version Description
9.2(1.0) Introduced on the Z9500.
7.4.1.0 Introduced
Usage
Information
All subsequent commands apply to this address family after you execute this
command. You can exit from this AFI/SAFI to the IPv6 Unicast (the default) family
by entering exit and returning to the Router BGP context.
504 Border Gateway Protocol