ppStatus[0] = 0x00000001 ppStatus[1] =
0x00000001
Dell# show software ifm linecard 0 | save flash://
sh_sf_ifm_linecard0
Start saving show command report .......
show system
Display operational information on all ports or a specified line card.
Z9500
Syntax show system [brief | linecard slot-id]
Parameters brief (OPTIONAL) Enter the keyword brief to view an
abbreviated list of system information.
linecard slot-id (OPTIONAL) Enter the keyword linecard and a slot number
to identify the switch ports. The slot ID range is from 0 to 2.
Command
Modes • EXEC
• EXEC Privilege
Command
History This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.4 The brief parameter no longer displays the current Reload
mode. To display Reload mode, use the show reload-
type command. Modified the show system stack-unit
command output to support Piece Part ID (PPID).
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 The Boot Flash field displays the code level for boot code
2.8.1.1 and newer, while older boot codes display as
"Present".
7.7.1.0 Added Master Priority field.
Control and Monitoring 171