Q15 12450 4000
Q16 1 100
Q17 1 100
Q18 1 100
Q19 1 100
Q20 600 1000
Q21 7000 7000
Q22 800 1000
Q23 5000 5000
Command
History This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.8.0 Introduced on the S4810.
show ip protocol-queue-mapping
Display the Z9500 CPU queue mapping for IPv4 protocols.
Z9500
Syntax show ip protocol-queue-mapping
Defaults Not configured.
Command
Modes
EXEC Privilege
Usage
Information The show output displays information on CPU traffic flows for IPv4 protocols,
including the ingress queue at which the traffic is queued and the CPU to which
protocol traffic is sent with the applied rate limits (configured or default) in kilobits
per second (kbps). The egress port queues on CPUs are abbreviated as: RP (Route
Processor), CP (Control Processor), and LC (line card).
Command
History This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Control Plane Policing (CoPP) 599