Example Dell# upgrade system tftp://10.11.8.12/dv-rainier-13 a:
00:39:32 : Discarded 1 pkts. Expected block num : 51. Received
block num: 50
!00:39:36 : Discarded 1 pkts. Expected block num : 65.
Received block num: 64
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!...................................................
...............................................................
...............................................................
.............!
93924044 bytes successfully copied
System image upgrade completed successfully.
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!
Image upgraded to all
verifyValidate the software image on the flash drive after the image has been transferred to the system, but
before the image has been installed.
Syntax verify { md5 | sha256 }[ flash:// ] img-file [hash-value]
Parameters md5 Enter the md5 keyword to use the MD5 message-digest
algorithm.
sha256 Enter the sha256 keyword to use the SHA256 Secure Hash
Algorithm
flash:// (Optional). Enter the flash:// keyword. The default is to
use the flash drive. You can just enter the image file name.
img-file Enter the name the Dell Networking software image file to
validate.
hash-value (Optional). Enter the relevant hash published on i-Support.
Default flash drive
Command
Modes
EXEC mode
Command
History Version Description
9.5(0.1) Introduced on the Z9500.
File Management 85