60
VLT Proxy Gateway
You can configure a proxy gateway in VLT domains. A proxy gateway enables you to locally route the
packets that are destined to a L3 endpoint in another VLT domain.

proxy-gateway lldp

Configure the LLDP proxy gateway
Z9500
Syntax proxy-gateway lldp
Command
Modes
VLT DOMAIN
Command
History Version Description
9.5(0.1) Introduced on the Z9500.
9.4(0.0) Introduced on the S4810, S4820T, S6000, Z9000, and MXL
Switch.
Usage
Information
The configuration is cached and sent to LLDP only in one of the following
conditions:
1) The port-channel connecting the two VLT domains, across DC, must be a VLT
LAG
2) The protocol lldp command is globally enabled
3) The proxy-gateway LLDP configuration is applied.
However, “proxy-gateway lldp” configuration is sent to the Layer 2 application.
When LLDP sends an IPC reply message, SWPQ is created towards LLDP to send
further updates to LLDP. When the proxy gateway peer-domain-link port-channel
command is provisioned, the configuration is sent to LLDP if the port-channel is a
VLT port-channel. However it will not check whether the port-channel is up or
down. LLDP determines the addition and removal of LAG ports and transmits LLDP
packets out accordingly.
VLT Proxy Gateway 1875