Parameters max-frame-
size
Enter the keywords max-frame-size to advertise the dot3
maximum frame size.
Defaults none
Command
Modes
CONFIGURATION (conf-lldp) and INTERFACE (conf-if-interface-lldp)
Command
History This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.7.1.0 Introduced on the S-Series.
7.6.1.0 Introduced on the C-Series.
7.4.1.0 Introduced on the E-Series.
advertise management-tlv
Advertise management TLVs (Type, Length, Value).
Z9500
Syntax advertise management-tlv {management-address | system-
capabilities | system-description | system-name}
To remove advertised management TLVs, use the no advertise management-
tlv {management-address | system-capabilities | system-
description | system-name} command.
Parameters management-
address
Enter the keyword management-address to advertise the
management IP address TLVs to the LLDP peer.
system-
capabilities
Enter the keywords system-capabilities to advertise the
system capabilities TLVs to the LLDP peer.
system-
description
Enter the keywords system-description to advertise the
system description TLVs to the LLDP peer.
system-name Enter the keywords system-name to advertise the system
name TLVs to the LLDP peer.
1176 Link Layer Discovery Protocol (LLDP)