3 0
0 0
4 0
0 0
5 0
0 0
6 0
0 0
7 0
0 0
Example of show sfm 0 backplane all ets details output
Dell#sh sfm 0 backplane all ets details
sfm 0 backplane all
Max Supported PG is 4
Number of Traffic Classes is 8
Admin mode is on
Admin Parameters:
--------------------
Admin is enabled
PG-grp Priority# Bandwidth TSA
------------------------------------------------
0 0,1,2,4,5,6,7 50 % ETS
1 3 50 % ETS
2 - -
3 - -
4 - -
5 - -
6 - -
7 - -
qos-policy-buffer
Create a QoS policy buffer and enter the configuration mode to configure the no-drop queues, ingress
buffer size, buffer limit for pausing, and buffer offset limit for resuming
Syntax qos-policy-buffer queue queue-num pause no-drop queue buffer-
size size pause-threshold threshold-value resume-offset
threshold-value shared-threshold-weight size
Parameters policy-name Name of the QoS policy buffer that is applied to an interface
for this setting to be effective with the DCB input policy. You
can specify the shared buffer threshold limit, the ingress
buffer size, buffer limit for pausing the acceptance of
packets, and the buffer offset limit for resuming the
acceptance of received packets. This method of
configuration enables different peer-provided and
administrative priorities to be set up because the intended
queue is directly configured instead of determining the
priority to queue mapping for local and remote parameters.
Data Center Bridging (DCB) 637