•* = (asterisk) the sequences in a pattern (0 or more
sequences).
•+ = (plus) the sequences in a pattern (1 or more
sequences).
•? = (question mark) sequences in a pattern (either 0 or 1
sequences).
NOTE: You must enter an escape sequence (CTRL+v)
prior to entering the ? regular expression.
•[ ] = (brackets) a range of single-character patterns.
•^ = (caret) the beginning of the input string. If you use
the caret at the beginning of a sequence or range, it
matches on everything BUT the characters specified.
•$ = (dollar sign) the end of the output string.
Command
Modes • EXEC
• EXEC Privilege
Command
History Version Description
9.2(1.0) Introduced on the Z9500.
8.2.1.0 Introduced on the E-Series ExaScale.
7.4.1.0 Introduced
show ip bgp ipv6 unicast inconsistent-as
View routes with inconsistent originating autonomous system (AS) numbers; that is, prefixes that are
announced from the same neighbor AS but with a different AS-Path.
Z9500
Syntax show ip bgp ipv6 unicast inconsistent-as
Command
Modes • EXEC
• EXEC Privilege
Command
History Version Description
9.2(1.0) Introduced on the Z9500.
8.2.1.0 Introduced on the E-Series ExaScale.
7.4.1.0 Introduced
Border Gateway Protocol 573