peer-domain-link port-channel exclude-vlan
Configure proxy-gateway LLDP, specify a port-channel and a VLAN or range of VLANs, and exclude a
VLAN or a range of VLANs from proxy routing.
Z9500
Syntax [no] peer-domain-link port-channel interface-identifier
exclude-vlan vlan-range
Parameters port-channel Configure the proxy-gateway interface port-channel. Port
channel range is from 1 to 128.
vlan-range Enter the member VLANs using comma-separated VLAN IDs,
a range of VLAN IDs, a single VLAN ID, or a combination. For
example:
Comma-separated: 3, 4, 6
Range: 5-10
Combination: 3, 4, 5-10, 8
Command
Modes
VLT DOMAIN PROXY GW LLDP
Command
History Version Description
9.5(0.1) Introduced on the Z9500.
9.4(0.0) Introduced on the S4810, S4820T, S6000, Z9000, and MXL
Switch.
Usage
Information
You can configure the port channel interface that must be associated with the
LLDP proxy gateway and exclude a VLAN or a range of VLANs from proxy routing.
This parameter is for an LLDP proxy gateway configuration.
Example Dell(conf)#vlt-domain 1
Dell(conf-vlt-domain)#proxy-gateway lldp
Dell(conf-vlt-domain-proxy-gw-lldp)#peer-domain-link port-
channel 20 exclude-vlan 3
VLAN Stacking 1827