flood-2328
Enable RFC-2328 flooding behavior.
Z9500
Syntax flood-2328
To disable, use the no flood-2328 command.
Defaults Disabled.
Command
Modes
ROUTER OSPF
Command
History This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Added support for Multi-Process OSPF.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series and E-Series.
Usage
Information In OSPF, flooding is the most resource-consuming task. The flooding algorithm,
described in RFC-2328, requires that OSPF flood LSAs (Link State Advertisements)
on all interfaces, as governed by LSA’s flooding scope (see Section 13 of the RFC).
When multiple direct links connect two routers, the RFC-2328 flooding algorithm
generates significant redundant information across all links.
By default, the system implements an enhanced flooding procedure that
dynamically and intelligently determines when to optimize flooding. Whenever
possible, the OSPF task attempts to reduce flooding overhead by selectively
flooding on a subset of the interfaces between two routers.
When you enable flood-2328, this command configures the system to flood LSAs
on all interfaces.
Open Shortest Path First (OSPFv2 and OSPFv3) 1271