Related
Commands
ipv6 prefix-list — configures an IPv6 prefix-list.
show ip bgp ipv6 unicast
View the current BGP routing table.
Z9500
Syntax show ip bgp ipv6 unicast [network [network-mask] [longer-
prefixes]]
Parameters network (OPTIONAL) Enter the network address (in dotted decimal
format) of the BGP network to view information only on that
network.
network-mask (OPTIONAL) Enter the network mask (in slash prefix format)
of the BGP network address.
longer-prefixes (OPTIONAL) Enter the keywords longer-prefixes to view all
routes with a common prefix.
Command
Modes • EXEC
• EXEC Privilege
Command
History Version Description
9.2(1.0) Introduced on the Z9500.
8.2.1.0 Introduced on the E-Series ExaScale.
7.4.1.0 Introduced
Usage
Information
When you enable the bgp non-deterministic-med command, the show ip
bgp command output for a BGP route does not list the INACTIVE reason.
show ip bgp ipv6 unicast cluster-list
View BGP neighbors in a specific cluster.
Z9500
Syntax show ip bgp ipv6 unicast cluster-list [cluster-id]
Parameters cluster-id (OPTIONAL) Enter the cluster id in dotted decimal format.
Command
Modes • EXEC
• EXEC Privilege
568 Border Gateway Protocol