in (OPTIONAL) Enter the keyword in to view BGP notifications
received from neighbors.
out (OPTIONAL) Enter the keyword out to view BGP
notifications sent to neighbors.
Command
Modes
EXEC Privilege
Command
History Version Description
9.2(1.0) Introduced on the Z9500.
8.2.1.0 Introduced on the E-Series ExaScale.
7.4.1.0 Introduced
Usage
Information
Enter the no debug ip bgp command to remove all configured debug
commands for BGP.
debug ip bgp updates
Allows you to view information about BGP updates.
Z9500
Syntax debug ip bgp [ipv6-address | peer-group peer-group-name | ipv6
unicast [ipv6-address]] updates [in | out | prefix-list prefix-
list-name]
To disable debugging, use the no debug ip bgp [ip-address | peer-group
peer-group-name | ipv6 unicast [ipv6-address]] updates [in |
out] command.
Parameters ipv6-address (OPTIONAL) Enter the IPv6 address in the x:x:x:x::x format
followed by the prefix length in the /x format. The range is /0
to /128.
NOTE: The :: notation specifies successive hexadecimal
fields of zeros.
peer-group
peer-group-
name
(OPTIONAL) Enter the keywords peer-group followed by
the name of the peer group.
in (OPTIONAL) Enter the keyword in to view BGP updates
received from neighbors.
out (OPTIONAL) Enter the keyword out to view BGP
notifications updates sent to neighbors.
532 Border Gateway Protocol