show util-threshold memory – Display the configured values of memory utilization
thresholds.
util-threshold memory
Configure the high or low memory utilization thresholds for SNMP traps.
Syntax util—threshold memory {cp |rp | linecard slot–id | all} {[high
{0-100}] [low {0-100}]}
Parameters cp Enter the keyword cp to configure the memory utilization
threshold for the Control Processor CPU.
rp Enter the keyword rp to configure the memory utilization
threshold for the Route Processor CPU.
linecard slot-id Enter the slot ID of the line card for which you want to
configure the memory utilization threshold. The range of
Z9500 slot IDs is from 0 to 2.
all Enter the keyword all to configure the memory utilization
threshold on all Z9500 CPUs: Control Processor, Route
Processor, and line cards.
{{high | low}
cpu-utilization-
threshold-
percentage}
Enter a percentage value to configure the high or low
threshold level for the percentage of memory a Z9500 CPU
can use. The percentage of memory utilization ranges from
0 to 100.
NOTE: A threshold level of 0 will disable Syslog and
SNMP traps.
Defaults • High threshold: 92%
• Low threshold: 82%
Command
Modes
CONFIGURATION
Command
History Version 9.2(1.0) Introduced on the Z9500.
Version
8.3.19.0
Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
188 Control and Monitoring