The following is a list of the Dell Networking OS version history for this command.
Version 9.2(1.0) Introduced on the Z9500.
Version
8.3.19.0
Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 8.3.1.0 Introduced the verbose option.
Version 7.7.1.0 Introduced on the S-Series.
show diag information
Display the status of offline diagnostic tests on a switch.
Z9500
Syntax show diag information
Defaults None.
Command
Modes
EXEC Privilege
Command
History This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.3.1.0 Introduced the verbose option.
7.7.1.0 Introduced on the S-Series.
Usage
Information Use the show diag information command to view the progress of offline
diagnostics on Z9500 CPUs: line-card processors (Linecard slots 0 to 2), Control
Processor (Linecard slot 3), and Route Processor (Linecard slot 4).
Example:
Before offline
diagnostics are
run on a switch
Dell# show diag information
Diag information:
Diag software image version:
9.5(0.1)
----------------------------
Linecard slot 0: No card diags executed yet (Card
Debugging and Diagnostics 657