Defaults Disabled.
Command
Modes
ROUTER OSPF
Command
History This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Added support for the Multi-Process OSPF.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
6.1.1.1 Introduced on the E-Series.
Usage
Information
To configure all routers and access servers within a stub, use this command.
Related
Commands router ospf — enters ROUTER OSPF mode to configure an OSPF instance.
auto-cost
Specify how the OSPF interface cost is calculated based on the reference bandwidth method.
Z9500
Syntax auto-cost [reference-bandwidth ref-bw]
To return to the default bandwidth or to assign cost based on the interface type,
use the no auto-cost [reference-bandwidth] command.
Parameters ref-bw (OPTIONAL) Specify a reference bandwidth in megabits per
second. The range is from 1 to 4294967. The default is 100
megabits per second.
Defaults 100 megabits per second.
Command
Modes
ROUTER OSPF
1256 Open Shortest Path First (OSPFv2 and OSPFv3)