• For a port channel interface, enter the keywords port-
channel then a number.
• For a VLAN interface, enter the keyword vlan then a
number from 1 to 4094.
Defaults none
Command
Modes EXEC
EXEC Privilege
Command
History Version Description
9.7(0.0) Added support for VRF.
9.2(1.0) Introduced on the Z9500.
9.1.(0.0) Introduced support for OSPFv3 on the S4810 and Z9000.
8.3.19.0 Introduced on the S4820T.
7.8.1.0 Added support for the C-Series.
7.4.1.0 Introduced on the E-Series.
Example Dell#show ipv6 ospf 3 neighbor gi 1/2
Neighbor ID Pri State Dead Time Interface ID
Interface
63.114.8.36 1 FULL/DR 00:00:38 4 Te
1/2
Dell#
timers spf
Set the time interval between when the switch receives a topology change and starts a shortest path first
(SPF) calculation.
Z9500
Syntax timers spf delay holdtime
To return to the default, use the no timers spf command.
Parameters delay Enter a number as the delay. The range is from 0 to
4294967295. The default is 5 seconds.
holdtime Enter a number as the hold time. The range is from 0 to
4294967295. The default is 10 seconds.
Defaults • delay = 5 seconds
Open Shortest Path First (OSPFv2 and OSPFv3) 1367