Version Description
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
6.1.1.0 Introduced on the E-Series.
ntp authenticate
Enable authentication of NTP traffic between the switch and the NTP time serving hosts.
Z9500
Syntax ntp authenticate
To disable NTP authentication, use the no ntp authentication command.
Defaults Not enabled.
Command
Modes
CONFIGURATION
Command
History This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
6.1.1.0 Introduced on the E-Series.
Usage
Information
You also must configure an authentication key for NTP traffic using the ntp
authentication-key command.
Related
Commands ntp authentication-key — configures the authentication key for NTP traffic.
ntp trusted-key — configures a key to authenticate.
1790 System Time and Date