Parameters value Enter a number as the LOCAL_PREF attribute value. The
range is from 0 to 4294967295.
Defaults Not configured.
Command
Modes
ROUTE-MAP
Command
History This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.1.1.0 Introduced on the E-Series ExaScale.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
6.1.1.0 Introduced on the E-Series.
Usage
Information
The set local-preference command changes the LOCAL_PREF attribute for
routes meeting the route map criteria. To change the LOCAL_PREF for all routes,
use the bgp default local-preference command.
Related
Commands
bgp default local-preference — changes the default LOCAL_PREF attribute for all
routes.
set metric
To assign a new metric to redistributed routes, configure a filter.
Z9500
Syntax set metric [+ | -] metric-value
To delete a setting, enter no set metric.
Parameters +(OPTIONAL) Enter + to add a metric-value to the
redistributed routes.
-(OPTIONAL) Enter - to subtract a metric-value from the
redistributed routes.
Access Control Lists (ACL) 325