L2PT : 0
IpMacAcl : 0
VmanQos : 0
EcfmAcl : 0
FcoeAcl : 0
iscsiOptAcl : 0
ipv4pbr : 0
vrfv4Acl : 0
Openflow : 0
fedgovacl : 0
nlbclusteracl: 2
-- linecard 2 --
Current Settings(in block sizes)
1 block = 256 entries
L2Acl : 4
Ipv4Acl : 4
Ipv6Acl : 0
Ipv4Qos : 2
L2Qos : 1
L2PT : 0
IpMacAcl : 0
VmanQos : 0
EcfmAcl : 0
FcoeAcl : 0
iscsiOptAcl : 0
ipv4pbr : 0
vrfv4Acl : 0
Openflow : 0
fedgovacl : 0
nlbclusteracl: 2
Dell#
test cam-usageVerify the CAM space that is available for IPv4 and IPv6 CAM profiles, and particularly to verify if enough
CAM space is available for the IPv6 ACLs you use in a policy map.
Z9500
Syntax test cam-usage service-policy input policy-map-name linecard
{number portset {port-pipe-number} | all}
Parameters input policy-
map-name
Enter the name of the policy map to verify. Maximum is 32
characters.
linecard
number portset
port-pipe-
number
Enter a line card and port-pipe number to check CAM usage
on specified ports. The range of valid port-pipe numbers is 0
to 3. Enter linecard all to verify the CAM space available
for all ports on the switch.
Defaults none
Command
Modes
EXEC Privilege
Content Addressable Memory (CAM) 585