Version Description
7.4.1.0 Introduced
debug ip bgp keepalives
Allows you to view information about BGP keepalive messages.
Z9500
Syntax debug ip bgp [ipv6-address | peer-group peer-group-name]
keepalives [in | out]
To disable debugging, use the no debug ip bgp [ip-address | peer-group
peer-group-name] keepalives [in | out] command.
Parameters ipv6-address (OPTIONAL) Enter the IPv6 address in the x:x:x:x::x format
followed by the prefix length in the /x format. The range is /0
to /128.
NOTE: The :: notation specifies successive hexadecimal
fields of zeros.
peer-group
peer-group-
name
(OPTIONAL) Enter the keywords peer-group followed by
the name of the peer group.
in (OPTIONAL) Enter the keyword in to view only information
on inbound keepalive routes.
out (OPTIONAL) Enter the keyword out to view only information
on outbound keepalive routes.
Command
Modes
EXEC Privilege
Command
History Version Description
9.2(1.0) Introduced on the Z9500.
8.2.1.0 Introduced on the E-Series ExaScale.
7.4.1.0 Introduced
Usage
Information
Enter the no debug ip bgp command to remove all configured debug
commands for BGP.
528 Border Gateway Protocol