debug ip bgp ipv6 dampening
View information on IPv6 routes being dampened.
Z9500
Syntax debug ip bgp ipv6 unicast dampening [in | out]
To disable debugging, use the no debug ip bgp ipv6 unicast dampening
command.
Parameters in (OPTIONAL) Enter the keyword in to view only information
on inbound dampened routes.
out (OPTIONAL) Enter the keyword out to view only information
on outbound dampened routes.
Command
Modes
EXEC Privilege
Command
History Version Description
9.2(1.0) Introduced on the Z9500.
8.2.1.0 Introduced on the E-Series ExaScale.
7.4.1.0 Introduced
Usage
Information
Enter the no debug ip bgp command to remove all configured debug
commands for BGP.
Related
Commands
show ip bgp dampened-paths – View BGP dampened routes.
debug ip bgp ipv6 unicast peer-group updates
View information about BGP peer-group updates.
Z9500
Syntax debug ip bgp ipv6 unicast peer-group peer-group-name updates
[in | out]
To disable debugging, use the no debug ip bgp ipv6 unicast peer-group
peer-group-name updates [in | out] command.
Parameters peer-group
peer-group-
name
Enter the keywords peer-group followed by the name of
the peer-group.
Border Gateway Protocol 529