Total 2 non-active route(s) using 128 bytes
Dell>
Related
Commands show ip route — displays information about the routes found in the switch.
show ip traffic
View IP traffic statistics on Z9500 CPUs, including ICMP, UDP, TCP and ARP counters.
Z9500
Syntax show ip traffic {all | cp | rp}
Parameters all (OPTIONAL) Enter the keyword all to view IP traffic
statistics from all processors.
cp (OPTIONAL) Enter the keyword cp to view only IP traffic
statistics from the Control Processor.
rp (OPTIONAL) Enter the keyword rp to view only IP traffic
statistics from the Route Processor.
Default View IP traffic statistics from all processors.
Command
Modes
EXEC Privilege
Command
History This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.1.1.0 Introduced on the E-Series ExaScale.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
6.1.1.0 Introduced on the E-Series.
984 IPv4 Routing