ipv6 nd prefix
Specify which IPv6 prefixes are included in Neighbor Advertisements.
Z9500
Syntax ipv6 nd prefix {ipv6-prefix | prefix-length | default} [no-
advertise] | [no-autoconfig] [no-rtr-address] [off-link]
[lifetime {valid | infinite} {preferred | infinite}]
Parameters ipv6-prefix Enter an IPv6 prefix.
prefix-length Enter the prefix then the prefix length. The length range is
from 0 to 128.
default Enter the keyword default to set default parameters for all
prefixes.
no-advertise Enter the keyword no-advertise to prevent the specified
prefix from being advertised.
no-autoconfig Enter the keywords no-autoconfig to disable Stateless
Address Autoconfiguration.
no-rtr-address Enter the keyword no-rtr-address to exclude the full
router address from router advertisements (the R bit is not
set).
off-link Enter the keywords off-link to advertise the prefix without
stating to recipients that the prefix is either on-link or off-
link.
valid-lifetime |
infinite
Enter the amount of time that the prefix is advertised, or
enter infinite for an unlimited amount of time. The range
is from 0 to 4294967295. The default is 2592000. The
maximum value means that the preferred lifetime does not
expire for the valid-life time parameter.
preferred-
lifetime |
infinite
Enter the amount of time that the prefix is preferred, or enter
infinite for an unlimited amount of time. The range is
from 0 to 4294967295. The default is 604800. The
maximum value means that the preferred lifetime and does
not expire.
Command
Modes
INTERFACE
Command
History This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
1022 IPv6 Basics