Dell 9.8(0.0) netbios-node-type

netbios-node-type
Specify the NetBIOS node type for a Microsoft DHCP client. Dell Networking recommends specifying
clients as hybrid.
Z9500
Syntax netbios-node-type type
Parameters type Enter the NETBIOS node type:
• Broadcast: Enter the keyword b-node.
• Hybrid: Enter the keyword h-node.
• Mixed: Enter the keyword m-node.
• Peer-to-peer: Enter the keyword p-node.
Defaults Hybrid
Command
Modes
DHCP <POOL>
Command
History This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.2.1.0 Introduced on the C-Series and S-Series.
network
Specify the range of addresses in an address pool.
Z9500
Syntax network network /prefix-length
Parameters network/
prefix-length
Specify a range of addresses. Prefix-length range is from 17
to 31.
716 Dynamic Host Configuration Protocol (DHCP)