Usage
Information
When you enter the redistribute ospf process-id command without any
other parameters, the software redistributes all OSPF internal routes, external type 1
routes, and external type 2 routes.
router bgp
Enter ROUTER BGP mode to configure and enable BGP.
Z9500
Syntax router bgp as-number
To disable BGP, use the no router bgp as-number command.
Parameters process-id Enter the number of the OSPFv3 process. The range is 1 to
65535.
Defaults Not configured.
Command
Modes
CONFIGURATION
Command
History Version Description
9.2(1.0) Introduced on the Z9500.
8.2.1.0 Introduced on the E-Series ExaScale.
7.4.1.0 Introduced
show capture bgp-pdu neighbor
Display BGP packet capture information for an IPv6 address.
Z9500
Syntax show capture bgp-pdu neighbor ipv6-address
Parameters ipv6-address Enter the IPv6 address (X:X:X:X::X) of a BGP neighbor.
Command
Modes • EXEC
• EXEC Privilege
Command
History Version Description
9.2(1.0) Introduced on the Z9500.
8.2.1.0 Introduced on the E-Series ExaScale.
562 Border Gateway Protocol