Command
History This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.6(0.0) Introduced on the Z9500.
Example Dell# show isci session
Session 0:
------------------------------------------------------
Target: iqn.2001-05.com.equallogic:
0-8a0906-0e70c2002-10a0018426a48c94-iom010
Initiator: iqn.1991-05.com.microsoft:win-x9l8v27yajg
ISID: 400001370000
Session 1:
---------------------------------------------------------
Target: iqn.2001-05.com.equallogic:
0-8a0906-0f60c2002-0360018428d48c94-iom011
Initiator: iqn.1991-05.com.microsoft:win-x9l8v27yajg
ISID: 400001370000.
Usage
Information Only sessions the switch observes are learned; sessions flowing through an
adjacent switch are not learned.
After the switch is reloaded, any information exchanged during the initial
handshake is not available. If the switch picks up the communication after
reloading, it would detect a session was in progress but could not obtain complete
information for it. Any incomplete information of this type would not be available in
the show commands.
Related
Commands •show iscsi — displays the currently configured iSCSI settings.
•show iscsi session detailed— displays detailed information about active iSCSI
sessions on the switch.
•show run iscsi— shows run iscsi.
show iscsi session detailed
Display detailed information on active iSCSI sessions on the switch.
Syntax show iscsi session detailed [session isid]
Parameters isid Enter the session’s iSCSi ID to display detailed information
about the specified iSCSi session.
1052 iSCSI Optimization