rate Enter the outgoing rate in multiples of 10 Mbps. The range is
from 0 to 40000.
burst-KB (OPTIONAL) Enter the burst size in KB. The range is from 0 to
10000. The default is 50.
Defaults Granularity for rate is Mbps unless you use the kbps option.
Command
Modes
INTERFACE
Command
History This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.2.1.0 Added the kbps option on the C-Series, E-Series, and S-
Series.
7.6.1.0 Introduced on the S-Series and C-Series.
6.1.1.1 Introduced on the E-Series.
Usage
Information
If traffic is shaped between 64 and 1000 Kbs, for some values, the shaped rate is
much less than the value configured.
Related
Commands
rate-shape — shapes traffic output as part of the designated policy.
strict-priority queue
Configure a unicast queue as a strict-priority (SP) queue.
Z9500
Syntax strict-priority unicast queue-number
Parameters unicast queue-
number
Enter the keyword unicast with the number fo a strict-
priority queue. The range of queue numbers is from 1 to 7.
Defaults none
Command
Modes
CONFIGURATION
Quality of Service (QoS) 1485