Command
Modes • EXEC
• EXEC Privilege
Command
History This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.2(1.0) Introduced on the Z9500.
9.2(0.0) Modified the drops keyword range, unit keyword range
and added the buffer and cpu management
statistics options.
8.3.19.0 Introduced on the S4820T.
8.3.11.5 Added i2c statistics and sata-interfaces statistics.
8.3.11.4 Added user port information.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.7.1.0 Introduced on the S-Series.
Usage
Information
Use the remote-exec command to remotely execute a command on the Route
Processor and line-card (LP) processor from the Control Processor.
Related
Commands show hardware — displays information on hardware components.
show control-traffic
Display information about the control traffic transmitted on a Z9500 CPU: Route Processor, Control
Processor, or line card.
Syntax show control—traffic {cp | rp | linecard slot-id} counters
Parameters cp Enter the keyword cp to display control-traffic information
from the Control Processor CPU.
rp Enter the keyword rp to display control-traffic information
from the Route Processor CPU.
linecard slot-id Enter the linecard slot-id parameters to display
control-traffic information from the specified line-card
processor. The range of Z9500 slot IDs is from 0 to 2.
Defaults None.
Debugging and Diagnostics 667